A Hitachi 2.5' disk in USB 3 disk enclosure with JMicron chip fails to be connected on Ubuntu Trusty. How To Program A Pats Key Ford. The same system was booted with Utopic Unicorn Beta 2 to verify whether newer kernel resolves the problem. Unfortunatelly it does not.

Jan 31, 2014. Dmesg usb 1-5: new high-speed USB device number 2 using ehci-pci usb 1-5: New USB device found, idVendor=152d, idProduct=2339 usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=5 usb 1-5: Product: USB to ATA/ATAPI Bridge usb 1-5: Manufacturer: JMicron usb 1-5: SerialNumber:. Jan 14, 2013. IdProduct 0x0551 bcdDevice 1.00 iManufacturer 1 JMicron iProduct 2 USB to ATA/ATAPI Bridge iSerial 5 DCA0434115FF bNumConfigurations 1. When the enclosure is switched on, the disk spins up but does not show up on Nautilus (A - dmesg below) Linux XXXX 3.8.4-102.fc17.x86_64 #1 SMP Sun.

The disk was properly recognised only the first time it was attached. Would it be possible for you to test the latest upstream kernel? Please test the latest v3.17 kernel[0]. If this bug is fixed in the mainline kernel, please add the following tag 'kernel- fixed-upstream'. If the mainline kernel does not fix this bug, please add the tag: 'kernel- bug-exists- upstream'. If you are unable to test the mainline kernel, for example it will not boot, please add the tag: 'kernel- unable- to-test- upstream'.

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub. Bus 001 Device 004: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 005 Device 005: ID 152d:2338 JMicron Technology Corp. / JMicron USA Technology Corp. JM20337 Hi-Speed USB to SATA & PATA Combo Bridge Bus 003. A Hitachi 2.5' disk in USB 3 disk enclosure with JMicron chip fails to be connected on Ubuntu Trusty. The same system was booted. [ 346.807304] usb 4-4: Product: USB to ATA/ATAPI Bridge [ 346.807307] usb 4-4. [ 348.478395] usbcore: registered new interface driver usb-storage [ 348. Sarah Edelman Change Your Thinking Pdf Writer there. 588835] usbcore:.

Once testing of the upstream kernel is complete, please mark this bug as 'Confirmed'. Thanks in advance.

This is a bit odd. I had an old WD 40GB IDE HDD connected to my PC running XP Pro SP2 via an IDE/SATA to USB bridge, just plugged into a USB 2.0 port. It was working fine until I plugged in an even older Maxtor 40GB ATA HDD instead. Both devices worked fine until I re-formatted the Maxtor one using Partition Commander. Now, neither drive is showing up in My Computer. In device manager, it says that my IDE/SATA to USB bridge is actually a USB to ATA/ATAPI bridge and is working properly. I've tried uninstalling the driver and then just plugging the bridge in again.

It then recognizes it as a ATA/ATAPI bridge again and says that my hardware is ready to use, but still no drive is showing. Shouldn't it show up as an IDE/SATA bridge? That's what it says on the bridge itself. Is it because I plugged in an ATA drive instead of an IDE or SATA? I don't really understand the difference, I'm afraid.

This has me a little puzzled. Many thanks in advance.